Wuxi Chiyang International Trading Co.,Ltd
Call us on:0086-510-85176697   E-mail: john@chiyangcn.com
News
Home > News > Content
1.2mm Self Adhesive Alum Foil Sealing Tape/Flashing Tape


Product Detail

Basic Info
  • Model NO.:BG1

  • Type:Roofing and Waterproofing

  • Ceiling Tile Shape:Roll

  • Material:Rubber

  • Thickness:1.2mm

  • Ceiling Tile Type:Fiberglass Ceilings

  • Surface Treatment:Spray Painted

  • Function:Waterproof

  • Certification:ISO, CE

  • Color:Black

  • Usage:Outdoor

  • Width:From 50mm to 1m

  • Top Surface:PE Film/Sand/Aluminium Foil

  • Bottom Surface:Siliconized Release Film

  • Application:Self Adhesive Directly

  • Advantage:No Pollution .

  • Feature:Good Rubber Elasticity and Elongation

Product Description

Our company adopt the German technology, and the most advanced international formulations suitable for the manufacture of light steel structure waterproof anti-corrosion materials, low cost, higher than the life of the steel structure itself 1-2 times, environmental materials to fill gaps in the domestic steel structure waterproofing,   bitumen waterproof  seal bitumen tape is the best one !
 
Product description:
 
bitumen waterproof seal bitumen tape is a kind of polymer modified asphalt materials, using polyester carpet or glass mat for the matrix, the surface covered with polyethylene film, aluminum foil or fine sand, the back is covered with a release sheet,keep the self adhesive modified bitumen flexible and waterproof. The product has a good self-adhesive and bending properties.
 
Application:
 
Construction and other base face is simple, clean, and can be widely used in roofing, basement, bathroom, etc. waterproofing works, and for legislation to pave and stick and pipe wall (except heat pipes), bridges , and other complex environment, especially in open flame is prohibited, covert fire waterproofing works.
 
Product Features:
 
Self-adhesive modified bitumen membrane with a self-adhesive surface of the waterproofing, sealing material, divided into with base membrane and without base membrane.And one side with self-adhesive layer and two sides with layers two kinds.The self-adhesive layer has covered with release sheept. the material of realease sheet also has a few kinds. all the self-adhesive layers no need glue, just because the adhesive of itself, which is acaused by the modified bitumen. Low-temperature-resistant properties of the product, and the MTR, tunnels and the scene of the fire with the best waterproof, moisture resistance and sealing materials, also apply to pipeline waterproof, anti-corrosion works.
 
The detailed information:
 
Thickness: 1mm, 1.2mm, 1.5mm, 2mm, 2.5mm, 3mm, 4mm
 
Width: 1m or any wide with 1m(that's mean we can cut into any rolls)
 
Length: 10m, 15m, 20m, 25m
 
Reinforcement: polyester, fiberglass or without anything
 
 
Technical data:
 
Physical 

 
 
Thickness(mm)

width(mm)

Area(m2)

1.2

1000

20

1.5

20

2.0

15

 
Property
 
The product meets the industry standard JC 840-1999 "self-adhesive plastic bitumen waterproofing membrane". The requirements to main physical properties are listed in table 2.
Table 2 physical properties 

No.

 

 

 1

PE

AL

N
 

2

Water impermeability
 

Pressure,MPa     ≥

0.2

0.2

0.1
 

Retention time,min  ≥

120,water impermeable

3

Heat resistance°C

-----

80 No slippage, flowing, dropping.

--
 

4

Tensile force N/50mm                ≥

130

200

 
 

5

Elongation at break,%              ≥

450

200

450
 

6

Softness

-20°C,Φ20mm,3s,180°C. No crack. 

--

7

Shear performance 
N/mm

Between membranes ≥

2.0 or fracture on the external agglutination section

fracture on the external agglutination section

Between membrane and aluminum plate ≥

8

Peel strength,N/mm            ≥

1.5 or fracture on the external agglutination section

fracture on the external agglutination section

9

Puncture resistance

 

water impermeable

10

Aging by artificial climate 

Appearance 

 

No crack, no bubble. 

---

Tensile force retention percentage,%

 

80

---

Softness at low temperature,°C

 

-10°C,Φ20mm,3s,180°C, No crack.

---

 


Product Categories

Fast Track

  • Feedback
    Wuxi Chiyang International Trading Co.,Ltd welcomes your comments! Please fill this form to give us feedback or report any problem when experiencing our website.
  • Quick Navigation
  • Contact Us
    Address: No.99, Jinxi Road, Binhu District, Wuxi City, Jiangsu, China.
    Tel: 0086-510-85176697    
    Fax: 0086-510-85176698    
    E-mail: john@chiyangcn.com
Copyright © Wuxi Chiyang International Trading Co.,Ltd